EOI: 4age bigport

[Tyrie]

I picked up a turbo 4age on the weekend and intend to use all the turbo gear off it. As far as I know (didnt get much/any info about it) its got forged pistons and decked/O-ringed block. It looks pretty clean, turbo was in excellent condition and the clutch looked almost new, I think the motor is pretty fresh.
The catch is it was sold as having "suspected bottom end damage", I've taken the sump off and found maybe 10 pieces of black plastic in the bottom of the sump up to 3mm in diameter. There was nothing metallic in the oil. Just looking up from underneath I could see no damage.

I'll be selling a short motor, maybe with head and inlet manifold, depends on $$$.
Anyone interested is welcome to come and have a look, make an offer. Located in Tuggeranong.

email tstarrs72@hotmail.com or PM me.

[Tyrie]

$150 for block/crank/rods/pistons, $250 with bigport head (no cam covers) $450 with bigport head and TVIS rwd inlet manifold.

I also have a set of custom made 4-1 extractors with a 2.5" collector, they have a pinhole leak where the oxygen sensor plugs in, but its easily fixed. They were made to fit in a datto 120Y but may work on other cars, ae86s etc? $250




And an SC12 supercharger, excellent condition never made any noises etc. $250

[Tyrie]

Pics:

Block-


Head-


Pistons-


Piston-


Bore-

[Tyrie]

extractors sold

[Tyrie]

Bare block is now free if anyone wants to come pick it up. Also the crank (2 broken off flywheel bolts included) which will probably need regrind due to spun big end bearing.

Rods, pistons $30

[BEN]

Dont suppose you still have the sump, baffle tray and oil pickup ??

[Tyrie]

yes I do, the sump Has been bashed in at the front to clear a swaybar, baffle may not be 100% flat from levering it off with a screwdriver, pickup is there. $15 for all 3.
Let me know if you want them.

[Tyrie]

block, crank, rods and pistons gone